Grass Group logo
FacebookTwitterYoutubePinterest

Call: 01638 720123
Click to view product listBack to list

 

  Click to view pdf
Download PDF

Progressive SDR Roller Mower

Progressive's three point hitch roller mowers employ the same deck design as the Tri-Deck Roller mowers. These mowers can be used for maintenance mowing, municipal grounds, estates, sports fields and many other lawn and turf applications where a quality cut is desired. The mowers cut as low as 13 mm (1/2") and provide an even cut without scalping.

Like all Progressive products, the mowers are a heavy duty design for superior strength and durability. The SDR mowers are available in 1.6 m (65") and 2.3 m (90") cutting widths, and can be either rear or front mounted.

Technical Specifications

SDR-65 Part # 524010
Cutting Dimensions1.6 m (65")
Deck DimensionsLengthWidthHeight
 1.3 m (51")1.83 m (72")0.18 m (7")
Recommended HP25 hp*
Weight442 kg (975 lbs)
SpeedsTractor PTO -540 rpm
 Blades -3040 rpm
 Blade Tip Speed - 18,287 rpm
Blades3 - 23" Blades
 5/16" x 2 1/2" heat treated alloy steel blades
Spindles3 Spindles, 30 mm
 Supported by 2 greasable ball bearings which are housed in a precision machined hub.

SDR-90 Part # 526010
Cutting Dimensions2.3 m (90")
Deck DimensionsLengthWidthHeight
 2.46 m (97")1.3 m (52")0.18 m (7")
Recommended HP35 hp*
Weight626 kg (1380 lbs)
SpeedsTractor PTO -540 rpm
 Blades -2890 rpm
 Blade Tip Speed - 18 300 fpm
Blades4 - 24" Blades
 5/16" x 2 1/2" heat treated alloy steel blades
Spindles4 spindles, 35 mm
 Supported by 2 greasable ball bearings which are housed in a precision machined hub.

Cutting HeightInfinite settings from 13 mm to 100 mm (1/2" to 4")
Deck DrivePTO shaft to right angle gear box driving "B" section belts to heavy duty spindles.
Blade Support3/4" x 1/2" x 8" long bar welded to spindle and machined for balance. Two 1/2" bolts hold blade rigid to provide a clean level cut
Deck ConstructionA single piece of 3/16" steel plate formed and welded with supporting members at high stress areas to achieve maximum structural strength.
Rollers6" diameter with 0.188" wall thickness, supported by 1 1/4" two bolt ductile flange bearings.
Belt AdjustmentEasily made by loosening hold down bolts and adjusting tap bolt to desired belt tension.
P.T.O. ShaftTelescoping category #4 agricultural PTO drive shaft, with proper safety shields, 1 3/8" - 6 spline quick disconnect yokes on both ends with ring lock collars
*May require weights on the front of the tractor
  • Progressive SDR Roller Mower
  • Progressive SDR Roller Mower
  • Progressive SDR Roller Mower
  • Progressive SDR Roller Mower
RotaDairon logoProgressive logoCTI logo
Grass Group logo